Instant Pass

 DSC01894 2

Indoor and outdoor use
Maximum dimensions: 9000 x 7000
Wind load standard Class 1
Optional Wind Classes 2/3/4

CURTAINCanvas: Base of technical fabric of high tenacity polyester impregnated with tinted PVC
Weight mass: 950 g/m2
Operating temperature from -30 to +70º
Finish: Shiny lacquered on both sides
Reaction to fire: Self-extinguishing M2 or M3 depending on the colour
Colour: See Range
In standard configuration:
If under 4500mm large: composite tubular profile fiberglass and polyester manufactured by pultrusion. Different diameters and thicknesses are available depending on the required wind load
If over 4500mm large: tubular profiles of galvanised steel. Different diameters and thicknesses available depending on the required wind load
Resistance to wind load (according to UNE - EN 12424)
The resistance to wind load is considered in the closed door
For doors that have to be operating with wind load, major reinforcements and modifications in the design of the curtain are needed. This option must be supervised by our technical office
Standard: Class 1 (equivalent approx. to a wind of 80 kph)
Optional: Classes 2 and 3 (depending on measurements)
Material: Composite fiberglass and polyester tube supporting the contact strip
Bottom bag to adjust the door canvas to the floor
Material: Reinforced fabric of polyester impregnated with PVC
Color: Yellow with black diagonal stripes
Opening system with Velcro® to reach the contact strip and the radio band transmitter
Rubber stoppers: Manufactured by moulding. Located at the ends of the reinforcements to reduce the noise and friction of the canvas within the guidelines
Below reinforcements:
Welded to the curtain, out of 3mm thick and black PVC. Reinforced with polyester fabric so as to prevent any fretting
Vision Windows (optional):
Crystal clear quality
All the welding’s on the canvas are done by radio-frequency, including the window welding
Lifting Belts
Material: Polyester
Width: 47mm
Thickness: 1.25mm
Resistance: 2650 daN
Ribbon guides and blocking clamps
All parts are injected plastic
Material: Akulon Polyamide especially formulated for technical parts requiring excellent mechanical and thermal properties.
As for larger sized doors the ribbon guides can be made out of galvanised steel

Self-supporting structure out of galvanised steel. Grey painted (RAL 7046) with a polyurethane 2 colour components
As an option can be delivered painted in any RAL colour
1.5mm galvanised steel sheet U-shaped profiled with reinforced corners
Each leg has 2 reinforced folded steel pieces, omega formed, welded within the U-profile, for the whole structure to reach a stronger stiffness and resistance
Base of 3mm thick galvanised steel sheet with holes, to be bolt to the ground
Rounded aluminium corners to eliminate friction and wearing of the curtain
Black polyamide ramps at the bottom of the foot to centre the curtain when the door is closed
Crossbeam: Drawer-body out of 1.5 thick galvanised steel with 2 reinforced parachutes welded inside
Side supports: profiles formed by galvanised sheet with steel housing for the self-aligning ball bearings that support the shaft. Welded to the crossbeam
Central supports: One for every pulley. Profiles formed from galvanised sheet steel with housing for the self-adjusting ball bearings. Welded to the crossbeam
The Axis is composed by:
A 110mm aluminium pulley with reinforcements beams such as central hollow knot with key
Interior: Plain profile out of 25.4 mm galvanised steel with keyway along its full length
The axis can be made out of 31.75 mm galvanised steel in case of extra-large or heavy doors
The complete structure plays as a very resistant beam, which can bear the weight of the curtain such as the elevation system (motor reducer, axis, pulleys and belts) supported on its legs-guide

FIXINGSDue to the specific sizes of these doors such as the demanding requirements as for wind resistance, the elements of support and fixation have to be designed to withstand the requested load
Head: to be fixed above the lintel or solid structure to maintain the structure vertical and to avoid pending movements due to the rotations of the axis
Legs: Anchors into the ground and, according to the requested height and wind pressure, two or three intermediate ones into wall or resistant structure

Motor reducer
Located on one side of the head
Motor reducer specific for heavy duty with mechanical positions switches
Plain axis with output for elastic coupling
Electric brake for an accurate positioning and locking of the curtain
Electric bake unlocked by pulling cord
Manual hand crank drive
Voltage (V). Frequency (Hz): 3x 230 / 400V 50 Hz
Power: variable, depending on door size: from 0.75 to 5.5 kW
Protection: IP 54
Optional features
Front positioned engine with chain drive
Engine cover with lid made in galvanised steel and painted the same colour as the door
Elastic coupling between the motor and axis to absorb vibrations and increase the reliability of the motor reducer

Controls on outer cover; Push buttons to open, close and stop. Voltage selector
Status indicator display and small information buttons inform about position, brake-down type, operations counter
Open-close button under maintaining contact with basic programming
Thermal protector in case of over voltage
Outer cover: painted steel with input and output glands
Protection: Up to IP 65
Power supply: 230/400V 3 Phase
Operation at 24V
The electrical wiring from the control panel box to the motor or fixed elements on the structure (anti-entrainment and passage photocell) is protected by an aluminium removable tube and located within the foot of the door thanks to some plastic brackets. Provided with quick connectors at both ends for an easy assembling and maintenance
Photocell and anti-drag photocell wires covered with a PVC profile
The electrical wiring installation must be done by an electrician and should be a protected installation in accordance to regulations and standards

Opening: 0.8 m/s
Deadline: 0.8 m/s
On large doors, the speeds may be different. Please, refer to specific cases

SECURITY SYSTEMS. (In accordance with RD 1435/92)
Footstep security: Photocell with reflector located on the frame of the structure
Security ribbon. Non requested, red coloured and centred on the curtain
Curtain bottom (leading edge) painted with diagonal yellow/black safety stripes
Anti-drag system: Photocell with reflecting pads located on the structure at 2 meters’ height
Signal flashing lights: Exterior and Interior
Irreversible motor: Must be operated by hand crank or chain before releasing the brake
Parachutes within the axis to avoid the curtain to fall down should any fixing element fail

Our doors are manufactured according to the UNE-EN 12453:2001 and comply with: harmonisation directives 89/392/EEC, 91/368/EEC and 93/44/EEC, and with the Royal Decree 1435/92 and modification 56/95

They are tested and certified by a notified body in accordance with EN 13241-1

Special Requirements upon request