Instant Roll Eco

 fricorsa 007

Indoor use Maximum sizes: 4500 x 4500
Light or moderate wind pressure

CURTAINCanvas: Base of technical fabric of high tenacity polyester impregnated with tinted PVC
Weight mass: 950 g/m2
Operating temperature from -30 to +70º
Finish: Shiny lacquered on both sides
Reaction to fire: Self-extinguishing M2
Colour: See Range
Cross beams for wind resistance:
In the standard configuration:
Material: composite tubular profile fiberglass and polyester manufactured by pultrusion
Resistance to wind load (according to UNE - EN 12424)
Standard: Class 0 (for indoor use with light air pressures)
Optional: Class 1 (for indoor use with light air pressures)
Socket: galvanized steel tube sized: 30 x 30 x 1.5
Bottom bag to adjust the door canvas to the floor:
Material: Reinforced fabric of polyester impregnated with PVC
Opening system with Velcro® to reach the contact strip and the Radio-Band transmitter
Vision windows (optional):
PVC crystal clear quality
All the welds on the canvas are done by radio-frequencies, including the window welding

STRUCTUREGeneral
Self-supporting structure out of galvanised Steel Grey Painted (RAL 7046) with a polyurethane colour of 2 components
As an option can be delivered painted in any RAL colour
Legs – Guides
U-shaped folded sheet
Base made of painted galvanized steel with holes for floor fixing
Reinforcement of folded sheet omega-shaped welded to the interior face of the leg to provide a higher rigidity and resistance to the ensemble
On the outer surface (made in aluminium), rounded corners to minimize curtain’s wearing and friction
Edges protected with nylon industrial brushes mounted on an aluminium clamping profile to increase the air pressure sealing and eliminate friction with the curtain
Head:
Axis:
Aluminium drums 110 mm with reinforcement radial rays and hollow central knot with keyway
Interior: solid galvanised steel profile of 25.4 mm
Side supports: profiles made with painted galvanized steel sheet that house the self-aligning ball bearings that support the shaft
Optional shaft cover: Made in the same material than the legs
Fixation:
Head: On a light structure to maintain verticality
Feet: Anchored to ground and one or two intermediate depending on height and air pressure

MOTORMotor reducer
Place on one side of the head
Irreversible motor reducer for heavy duty with mechanical position switches integrated
Solid shaft with elastic output coupling
Internal parachute
Hollow shaft with machined keyway to connect to door’s shaft
Electric brake for accurate positioning and locking of the curtain
Electric brake manual release by a pulling cord
Manual opening system by hand crank (On heights bigger than 3000 a chain is used instead)
Voltage (V) Frequency (Hz): 3 x 230 / 400V 50 Hz
Power: 0.5 hp
Protection: IP 65
Optional features:
Front motor with chain transmission
Motor lid cover in painted steel sheet in pure white RAL 9010

CONTROL PANEL. TS961Controls on outer lid: open and stop buttons & tension isolator
Programmable relay with status indicator display and mini buttons that reports about: position, type of failure and counter of operations
Push buttons to open and close by deadman contact and basic programming
Motor protection by over-consumption and lack of phase
PVC steel box with input and output gland
Protection: IP 65
Voltages:
Power supply: 230/400 V three phase
Operation at 24V
Wiring from control panel box to motor protected with a PVC duct
Electrical data:
Voltage (V) Frequency (Hz): 3 x 230 / 400V 50 Hz
Protection: IP 65
Electrical wiring to the box must be performed by an electrician and should be a protected installation in accordance with regulations and standards

OTHER FEATURESSpeeds:
Open: Up to 1 m / s
Closing: 1m / s

SECURITY SYSTEMS. (In accordance with RD 1435/92)
Pedestrian security: Photocell with reflector placed on structure’s frame.
Bottom of the curtain (leading edge) is painted with diagonal safety stripes Yellow / Black
Anti-crushing: bottom safety bar by radio band
Signal flashing lights: Exterior and Interior

Our doors are manufactured according to the UNE-EN 12453:2001 and comply with: harmonisation directives 89/392/EEC, 91/368/EEC and 93/44/EEC, and with the Royal Decree 1435/92 and modification 56/95

They are tested and certified by a notified body in accordance with EN 13241-1

Special Requirements upon request