Instant Pass Basic

 telefono 3 1080

Indoor and outdoor use
Maximum dimensions: 6000 x 6000
Standard wind resistance: Class 1
Optional wind resistance: Class 2-3

CURTAINCanvas: Base of technical fabric of high tenacity polyester impregnated with tinted PVC
Weight mass: 950 g/m2
Operating temperature from -30 to +70º
Finish: Shiny lacquered on both sides
Reaction to fire: Self-extinguishing M2
Colour: See Range
Cross beams for wind resistance:
In the standard configuration:
Material: If under 4500mm large: composite tubular profile fibreglass and polyester manufactured by pultrusion. Different diameters and thicknesses are available depending on the required resistance. If over 4500mm large: tubular profiles of galvanized steel. Different diameters and thicknesses available depending on the required resistance
Resistance to wind load (UNE - EN 12424)
Standard: Class 1 (Equivalent approx. To a wind of 80 Km/h)
Optional: Classes 2 and 3 (depending on sizes)
Socket: fiberglass and polyester composite steel tube supporting the contact safety bar
Bottom bag to adjust door canvas to the floor:
Material: Polyester reinforced Fabric, impregnated with PVC
Colour: Yellow with black diagonal stripes
Opening system with Velcro ® to access the contact strip and the radio band transmitter
Rubber bumpers: Manufactured by moulding, located at the end of the reinforcements in order to reduce noise and friction of the canvas with the guides
Lower reinforcements: Welded to the curtain, in black PVC, 3 mm thickness. Reinforced with polyester fabric to prevent fretting
Vision windows (optional):
PVC crystal clear quality
All welds made on canvas, including window welding’s are made by radio frequency welding
Lifting belts:
Material: Polyester
Width: 47mm
Thickness: 1.25mm
Resistance: 2650 daN
Ribbon guides and blocking clamps:
All parts made by injected plastic
Material: Akulon Polyamide especially formulated for technical parts requiring excellent mechanical and thermal properties

Not self-supporting. Galvanised Steel
As an option, RAL powder coated can be chosen
1.5mm galvanised steel sheet. U-shaped profiled with reinforced corners
On each leg, there is a reinforcement vertical plate bent in omega shape, welded to the inner wall of the leg. This gives an increased resistance to the whole
Base of galvanised steel plate 3mm. thick, with holes to be screwed to the ground, rounded corners in aluminium reducing friction and wearing on the curtain. Folded sheet ramps, at foot’s bottom, for centring the curtain when door closes
Crossbeam: Squared tubular galvanised steel, resting on the foot by the side supports. 1.5mm thick sheet with an omega profile welded to the interior wall of it
Side supports: Profiles formed from galvanized sheet steel housing the self-aligning ball bearings that support the shaft welded to the crossbeam
Central Supports: One for every pulley profiles formed from galvanised sheet steel housing the centring ball bearings welded to the crossbeam
Axis composed by: 110mm aluminium pulleys. Reinforcement beams and central hollow knot with keyway. In the interior: solid galvanised steel profile of 25.4mm with keyway along its length
The whole makes a very strong beam that holds the weight of the curtain and the elevation mechanisms

FIXINGSHead: Above lintel or enough solid structure to withstand the weight and the balance of the whole structure
Feet: Anchors on the ground and two or three intermediate on the wall or structure, according to height and wind pressure required

MOTORMotor reducer
Located on the side of the head
Irreversible compact motor reducer for heavy duty with mechanical position switches integrated
Internal parachute
Hollow shaft with keyway shaped to receive the shaft of the door
Electric brake for accurate positioning and locking of the curtain
Electric brake unlocking by pulling cords
Manual hand crank drive (Chain drive for doors above 3000mm high)
IP 54 Protection
Voltage V. Frequency Hz: 3 x 230 / 400V 50 Hz
Power: variable, depending on door size from 0.45 to 1.8 kW
Protection: IP 65
Optional features:
Front positioned engine with chain drive
Engine cover with lid made in galvanised steel

CONTROL BOX - TS961Controls on outer cover: Push buttons to open, close and stop. Voltage selector. Status indicator display and information. Operations counter and optional maintenance indicator
PVC seal with input and output gland
Protection: Up to IP 65
Voltages: Power supply: 230/400V three phase
Operation at 24V
Electrical wiring from control panel box to motor protected by a standard PVC tube. Quick connectors at both ends for easy assembly and maintenance
Photocell and anti-drag photocell wires covered with a PVC profile. They have connectors on the end for easy assembly and maintenance
The electrical wiring installation must be done by an electrician and should be a protected installation in accordance to regulations and standards

Opening: 0.92 m / s
Closing: 0.92 m / s
On large doors, the speeds may be different. Refer to specific cases.

SECURITY SYSTEMS (In accordance with RD 1435/92)
Footstep security: Photocell with reflector placed on structure’s frame
Security ribbon. Unsolicited, in red colour. Centred on the curtain
Bottom of the curtain (leading edge) painted with diagonal safety stripes Yellow / Black
Anti-crushing: bottom safety bar by radio band
Anti-drag system: Photocell with reflecting pads located on the structure at two meters high
Signal flashing lights: Exterior and Interior
Irreversible motor: Must be operated by hand crank or chain before brake release
Motor with parachutes in case of breakage or internal wear

Our doors are manufactured according to the UNE-EN 12453:2001 and comply with: harmonisation directives 89/392/EEC, 91/368/EEC and 93/44/EEC, and with the Royal Decree 1435/92 and modification 56/95

They are tested and certified by a notified body in accordance with EN 13241-1

Special Requirements upon request